Micron in Taiwan
Micron’s global footprint is designed to deliver comprehensive customer collaboration, support and quality around the world and throughout the product lifecycle.
Taiwan plays a meaningful role in strengthening Micron’s position in leading-edge DRAM.
Micron’s Taiwan sites include sales and technical support in Taipei along with state-of-the-art fabrication facilities in Taichung and Taoyuan that together comprise the company’s DRAM Center of Perfection.
The Center’s goal is to achieve the most efficient and effective technology transfer and manufacturing ramp by combining front-
and back-end manufacturing, product engineering and technology development roles.
As a MTB Assembly Equipment Engineer, you will be responsible for evaluating and improving manufacturing processes, materials and equipment, coordinate equipment / material procurement and qualify and implement new process, equipment and materials.
You will also coordinate training requirements and conduct training. For engineering supervisor, you will manage, develop and provide feedback on employee performance as well as allocate staffing and monitor staff.
For technical member, your responsibility will include performing technical duties.
Responsibilities and Tasks
Evaluate and Improve Assigned Assembly Manufacturing Processes, Materials, and / or Equipment
Maintain General process knowledge
Maintain Equipment knowledge
Maintain Materials knowledge
Optimize process and / or equipment variables
Identify all process variables
Understand DOE / FMEA / OCAP / 8D / SPC / Repair / PM (preventive) techniques
Perform containment of process and equipment deviations
Determine root cause
Implement corrective action
Design equipment components (Improve equipment capability by exploring new ideas / concepts and implement on equipment).
Evaluate Future Process, Equipment and / or Material Technologies
Evaluate pertinent technology and engineering advancements relating to equipment, materials and processes
Locate and research technical information on equipment, materials, and / or processes in journals, literature, web, etc.
Build and maintain effective relationships with suppliers
Identify supplier’s materials or equipment design and production processes
Create decision matrix for equipment and material selection
Evaluate new tooling material for cost saving effort.
Coordinate Equipment and / or Material Procurement
Maintain knowledge of process, equipment, and material requirements
Follow equipment safety requirements
Define quality and performance requirements
Maintain knowledge of procurement document requirements and format
Follow Micron Capital Equipment Procedures (MICAP)
Maintain working knowledge of Assembly’s equipment installation procedures
Set up required inventories for start up (tools, spare parts, materials).
Maintain knowledge SAP MATREQ (Materials Requisition) program to look up and order spare parts
Maintain knowledge of equipment tracking programs : ETI (Equipment Tracking Interface), ETReports, ETMaint.
Take lead and coordinate projects, ensuring meeting timeline / production ramp
Qualify New Process, Equipment and / or Material
Maintain knowledge of quality systems
Maintain knowledge of Assembly’s qualification procedures
Maintian knowledge of Quality and Reliability Assurance (QRA).
Implement New Process, Equipment and / or Material
Define and maintain operation, maintenance, and energy isolation procedures
Review current procedures on an on-going basis
Maintain knowledge of Assembly On-Line Document System (AODS)
Maintain knowledge of change communication procedures : ECN (Engineering Change Notice), Inbox, emails
Assess material / tool requirements and projections
Maintain knowledge of material attributes (shelf life, storage requirements, etc.)
Ensure materials compatibility with equipment and parameters
Coordinate materials purchasing requirements
Define safety stock and re-order quantities
Maintain knowledge of supplier’s constraints
Maintain knowledge of new chemical / material approval process and MICIS (Micron Chemical Information Systems)
Coordinate Training Requirements and Conduct Training
Develop, or coordinate development of, training materials for existing equipment
Coordinate and conduct technical training with Engineering and Equipment Support (EES) group
Conduct training for production trainers
Train and mentor others
Contribute to a Safe and Compliant Work Environment
Identify and promptly report hazards
Follow safety procedures and area work rules (including use of proper PPE, energy isolation, and chemical safety)
Establish SWP and Hazard Analysis for maintenance activities
Operate and maintain equipment and tools within manufacturer and company guidelines
Use proper lifting techniques and work in an ergonomically correct manner
Manage, Develop, and Provide Feedback on Employee Performance (for Engineering Supervisor only)
Review job profile with each technician to individually clarify supervisor and department expectations, responsibilities, and goals.
Discuss with the technician how their performance will be measured
Observe and document behaviors and performance on a continuous basis. Document both good and bad performance
Address performance and behavioral issues consistently and document issues on a Data Sheet and / or Corrective Action form
Use available resources to gather feedback (e.g. leads, trainers, other supervisors, engineers, and other technicians).
Review previous performance reviews and emails
Determine level of employee effectiveness by comparing performance with the expectations in the job profile
Give feedback in an organized respectful manner. Note what has been observed, why it is important, and what needs to happen.
Ask questions to ensure the receiver fully understands the feedback given
Maintain employee files that are organized and current. Include hard copies of signed documentation and attendance records
Develop realistic performance and career goals to meet the technician’s career plans
Discuss specific competencies that need to be developed, and create an action plan and goals to address specific competencies that need improved
Set target dates for improvement goals, then follow up with employee on a regular basis
Be a coach and mentor. Provide the support needed to close performance gaps. For example, provide time for on-the-job training and classes
Allocate Staffing and Monitor Staff (for Engineering Supervisor only)
Determine the number of technicians that are required to meet production goals
Identify group resources, capabilities, and constraints and allocate resources appropriately
Ensure time is used productively
Build spare parts safety stock to shorten machine malfunction time
Select team members by following the appropriate department and company hiring guidelines
Provide developmental feedback when a candidate is not selected
Perform technical duties (for Technical Member)
Provide technical leadership on production / equipment technology
Handles moderately complex , important engineering projects
Develop in-depth understanding and knowledge on related field
Conduct feasibility studies on new product packaging method and techniques to meet current and future requirement
According to the "Employment Service Act", any position with salary lower than NTD$40,000, please refer to the salary information in the job description.
Positions with a salary over NTD$40,000 may not be mentioned in the job description and will be discussed in interview.
We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.
For US Sites Only : To request assistance with the application process and / or for reasonable accommodations, please contact Micron’s Human Resources Department at 1-
800-336-8918 or 208-368-4748 and / or by completing our General Contact Form
Keywords : Taichung city Taichung (TW-TXQ) Taiwan (TW) Backend Manufacturing Experienced Regular Engineering #LI-EH1 Tier 3